This is a final screw that takes a Straumann® Torx driver. Torque is 35ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
It...
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for Straumann® Tissue Level 4.8/6.5 WN on implant and on abutment only.
This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. The torque is 15 ncm and is no longer being made with an anti-rotational flat side. This...
This ti base comes with a final screw, SKU 19.027 that takes a Nobel® Unigrip/Star driver. The torque is 35 ncm. This ti base has a 1.2mm collar height. Wax up sleeve sold...
This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15...
This premilled chrome cobalt blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm.
It comes with the final screw - SKU 19.015
Holders for premills:
Holder HLDSTD -...
This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm.
It comes with the final screw - SKU 19.071
Holders for premills:
Holder HLDSTD - 98mm disc...