This is a final screw that takes a .048/1.20mm hex driver. Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons®...
This ti base comes with a wax up sleeve and a final screw, SKU 19.024 that takes a 1.22mm hex driver.
The torque is 24 ncm.
This ti base has a 0.3mm collar height and is no...
This ti base comes with a final screw, SKU 19.012 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 0.8mm collar height and is no longer being made with an...
This ti base comes with a final screw, SKU 19.056 that takes a .050/1.27mm hex driver.
The torque is 30 ncm.
This ti base has a 0.8mm collar height and is no longer being made with...
This ti base comes with a wax up sleeve and a final screw, SKU 19.048 that takes a 1.00mm hex driver. The torque is 15 ncm and is no longer being made with an anti-rotational flat side...
This ti base comes with a final screw, SKU 19.026 that takes a Straumann® Torx driver.
The torque is 35 ncm.
This ti base has a 0.3mm collar height.
Wax up sleeve sold...
This ti base comes with a wax up sleeve and a final screw, SKU 19.031 that takes a Nobel® Unigrip/Star driver.
The torque is 15 ncm.
It is compatible with the following multiunit...
