This is a final screw that takes a .048/1.20mm hex driver. Torque is 20ncm.
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems: 3i® Certain 3i® Osseotite Astra® Osseospeed Astra® EV Ankylos® BioHorizons® Conical...
This ti base comes with a final screw, SKU 19.034 that takes a .048/1.20mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height and is no longer being made with...
This ti base comes with a final screw, SKU 19.034 that takes a .048/1.20mm hex driver. The torque is 20 ncm. This ti base has a 1.5mm collar height and is no longer being made...
The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver. The torque is 25 ncm. This ti base is used for changing the...
This ti base comes with a wax up sleeve and a final screw, SKU 19.034 that takes a .048/1.20mm hex driver. The torque is 20 ncm. This ti base has a 0.3mm collar height and is no...
This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only. The...
This ti base comes with a final screw, SKU 19.034 that takes a .048/1.20mm hex driver. The torque is 20 ncm. This ti base has a 1.5mm collar height. Wax up sleeve sold separately...