This is a final screw that takes a .050/1.27mm hex driver. Torque is 25ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used...
This five pack of castable sleeves will fit the DESS Non Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons®...
This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver.
The torque is 20 ncm.
This ti base has a 1.1mm collar height and is no longer being made with...
This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 0.9mm collar height. Wax up sleeve sold separately - SKU...
This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.1mm collar height. Wax up sleeve sold separately - SKU 33...
This ti base comes with a final screw, SKU 19.072 that takes a .048/1.2mm hex driver. The torque is 20 ncm. This ti base has a 1mm collar height. Wax Up Sleeve sold separately...
This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately...
This ti base comes with a final screw, SKU 19.011 that takes a .048/1.20mm hex driver.
The torque is 20 ncm.
This ti base has a 0.3mm collar height and is no longer being made...
