This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections:
Nobel® Active, Nobel®Replace, and Nobel®Branemark (NP and RP), BioHorizons® Internal Hex and External Hex, 3i® Certain (internal connection), 3i® Osseotite - External Hex, Megagen® Anyridge (N style only), Neodent®, Hiossen, Astra EV Multi base, and the DESS Multiunit abutments (excluding Nobel Branemark 5.0/WP which has a 6.5 platform).
This angled multiunit abutment comes with a screw that takes the Straumann® torx driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit...
This angled multiunit abutment comes with a screw that takes the .048/1.2hex driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections: Nobel®...
This angled multiunit abutment comes with a screw that takes the .050/1.27mm hex driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit...
This angled multiunit abutment comes with a screw that takes the .050/1.27mm hex driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit...
This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections:...
This straight one-piece multiunit abutment has a fixed internal screw and is inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment driver from...
This straight one-piece multiunit abutment has a fixed internal screw and is inserted using the uni-abutment driver - DTUNI The torque for this straight multiunit abutment is 20 ncm. The top of this...
This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit...
This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver.
The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit...
This angled multiunit abutment comes with a screw that takes the .050/1.27 hex driver. The top of this multiunit abutment is 4.8mmD and it is compatible with the following multiunit connections:...
