This is a final screw that takes a .050/1.27mm hex driver. Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.
This five pack of castable sleeves will fit the DESS Engaging Straight Ti Bases for the following systems:
3i® Certain
3i® Osseotite
Astra® Osseospeed
Astra® EV
Ankylos®
BioHorizons® Conical...
This ti base comes with a wax up sleeve and a final screw, SKU 19.044 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.5mm collar height.
This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver.
This ti base has a 0.3mm collar height and has a 6mm chimney height.
The torque is 15 ncm and is...
This ti base comes with a final screw, SKU 19.027 that takes a Nobel® Unigrip/Star driver.
The torque is 35 ncm.
This ti base has a 1.2mm collar height.
Wax up sleeve sold...
The AngleBase® ti base comes with an angulated screw, SKU 19.306 that takes the DESS angulated screw channel driver.
This ti base has a 0.3mm collar height and has a 4.5mm chimney...
The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver.
The torque is 35 ncm.
This ti base is used for changing the screw...
This ti base comes with a final screw, SKU 19.027 that takes a Nobel® Unigrip/Star driver.
The torque is 35 ncm.
This ti base has a 1.2mm collar height and is no longer...
