Multiunit compatible

This is a closed tray impression transfer with a 5mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a 4 pack of closed tray impression transfers with a 5mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of...

This is a closed tray impression transfer with an 8mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a 4 pack of closed tray impression transfers with an 8mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel®...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of PEEK Plastic and is used for scanning on top of a multiunit abutment. Screw is provided - SKU 19.006 It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain®...

This titanium temporary abutment comes with a screw, SKU 19.006, that takes a Nobel® Unigrip/Star screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile...

This titanium temporary abutment comes with a screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This titanium temporary abutment comes with a screw, SKU 19.110, that takes a 0.050/1.27 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This ti base comes with a final screw, SKU 19.006, that takes a Nobel® Unigrip/Star driver. This ti base has a 0.3mm collar height and has a 6mm chimney height. The torque is 15 ncm and is no longer being made with an anti-rotational flat side...

This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver.  There are 10 Ti Bases in the package.  This ti base has a 0.3mm collar height and has a 6mm chimney height. The torque is 15 ncm and...

This ti base comes with a final screw, SKU 19.006 that takes a Nobel® Unigrip/Star driver. The torque is 15 ncm. This ti base has a 0.3mm collar height and the shaft/chimney is 8mm tall above the collar and is no longer being made with...

This ti base comes with a final screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. This ti base has a 0.3mm collar height and has a 6mm chimney height. The torque is 15 ncm and is no longer being made with an anti-rotational flat...

This ti base comes with a final screw, SKU 19.065, that takes a 0.048/1.22 mm Hex screwdriver. This ti base has a 0.3mm collar height and has a 6mm chimney height. The torque is 15 ncm and is no longer being made with an anti-rotational flat...

The wax up sleeve is for waxing and casting on top of the 15.007 Multiunit (RP) Ti Base.