Multiunit

This is a closed tray impression transfer with a 5mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a 4 pack of closed tray impression transfers with a 5mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of...

This is a closed tray impression transfer with an 8mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of Multiunit...

This is a 4 pack of closed tray impression transfers with an 8mm height. This impression coping has a fixed internal closed tray screw and the transfer is hand tightened. It is compatible with the following top (Ø 4.8 mm) of...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a Nobel®...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. It is compatible with the following multiunit connections:...

This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.5.5mm extra height, designed for optimal use in deep implant positions.These are autoclavable and reusable. 

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of PEEK Plastic and is used for scanning at the implant level. It is compatible with the following multiunit connections: Nobel® Branemark WP 5.0. Screw sold separately - SKU 19.031

This scan body is made of PEEK Plastic and is used for scanning on top of a multiunit abutment. Screw is provided - SKU 19.006 It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain®...

This manual driver for intra-oral scan body enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This multiunit driver fits the top of the Multiunit Abutments from DESS. The other end of this driver is a 4x4/square connection that fits into a torque wrench.

This multiunit driver fits the top of the Multiunit Abutments from DESS. It is compatible with the following multiunit connections: Nobel® Branemark - 5.0. The other end of this driver is a 4x4/square connection that fits into a torque wrench.

This is a final screw for the AngleBase® Ti bases that takes the DESS Angulated Screw Channel driver. Torque is 15ncm. It can be used to move the screw access hole up to 25 degrees in any direction. All of our screws are stress...

This titanium temporary abutment comes with a screw, SKU 19.006, that takes a Nobel® Unigrip/Star screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile...

This titanium temporary abutment comes with a screw, SKU 19.055, that takes a 0.048/1.20 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This titanium temporary abutment comes with a screw, SKU 19.110, that takes a 0.050/1.27 mm Hex screwdriver. It is compatible with the following top (Ø 4.8 mm) of Multiunit Abutments:  3i Biomet Certain® Low Profile &...

This titanium temporary abutment comes with a screw, SKU 19.031, that takes a Nobel® Unigrip/Star screwdriver.  It is compatible with the following multiunit connections: Nobel® Branemark - 5.0.