Osstem® / Hiossen®

This is a final screw that takes a .048/1.2mm hex driver.  Torque is 30ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a 0.048/1.22 mm...

Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a 0.048/1.22 mm...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

This PEEK intra-oral scan body extender enables you to clip it on to the intraoral scan body in hard to reach areas.5.5mm extra height, designed for optimal use in deep implant positions.These are autoclavable and reusable. 

This latch style driver is made of stainless steel and is compatible with .048/1.22mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.22mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This latch style driver is made of stainless steel and is compatible with .048/1.22mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification.

This manual driver for intra-oral scan body enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. 

NO RETURN ON THIS PRODUCT. This premilled chrome cobalt blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.072 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard...

NO RETURN ON THIS PRODUCT. This premilled chrome cobalt blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.073 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard...

This premilled titanium blank is engaging, is 14mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.073 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.072 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.073 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver.  Torque is 20ncm. It is compatible with Hiossen® (Osstem®) - Mini, Camlog® - 3.8 and 4.3, and Neodent® GM...

This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 25ncm. It is compatible with Astra® EV - 4.8 and Hiossen® - Standard. It can be used to move the screw access hole up...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...