Osstem® / Hiossen®

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 30 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This straight multiunit abutment and the screw are the one piece.The torque for this straight multiunit abutment is 35 Ncm and it can be inserted using the DESS multiunit driver - DTMURP. You may also use the straight multiunit abutment...

This temporary abutment includes final screw (SKU 19.072). Recommended torque: 20ncm.

This temporary abutment includes final screw (SKU 19.073). Recommended torque: 30ncm.

This temporary abutment includes final screw (SKU 19.072). Recommended torque: 20ncm.

This temporary abutment includes final screw (SKU 19.073). Recommended torque: 30ncm.

This ti base comes with a final screw, SKU 19.072 that takes a .048/1.2mm hex driver. The torque is 20 ncm. This ti base has a 1mm collar height. Wax Up Sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.072 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.073 that takes a .048/1.2mm hex driver.  The torque is 30 ncm. This ti base has a 1mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height. Wax up sleeve sold separately - SKU 33.001P5

This ti base comes with a wax up sleeve and a final screw, SKU 19.072 that takes a .048/1.2mm hex driver. The torque is 20 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side.

This ti base comes with a final screw, SKU 19.072 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This ti base comes with a final screw, SKU 19.073 that takes a .048/1.2mm hex driver.  The torque is 30 ncm. This ti base has a 1mm collar height and is no longer being made with an anti-rotational flat side. Wax up...

This ti base comes with a final screw, SKU 19.073 that takes a .050/1.27mm hex driver. The torque is 30 ncm. This ti base has a 3mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold...

This five pack of castable sleeves at 0° will fit all of our AngleBase® ti bases. The internal connection of this castable sleeve is non engaging. The AngleBase® ti base is not designed to be casted so when using this sleeve you would...

This five pack of castable sleeves at 10° will fit all of our AngleBase® ti bases. The internal connection of this castable sleeve is non engaging. The AngleBase® ti base is not designed to be casted so when using this sleeve you would...

This five pack of castable sleeves at 20° will fit all of our AngleBase® ti bases. The internal connection of this castable sleeve is non engaging. The AngleBase® ti base is not designed to be casted so when using this sleeve you would...

This five pack of castable sleeves will fit on the DESS Engaging Straight Ti Bases for the following systems: Astra Osseospeed / Astra EV Ankylos BioHorizons Internal Hex / BioHorizons External Hex Biomet 3i Certain / Biomet 3i Osseotite Camlog /...