The final screw requires the use of a 0.050/1.27 Hex screwdriver and is for use with the following DESS multiunit parts - 15.007, 15.007/8, 24.007, 28.007, 11.007-P10.
Torque is 15Ncm...
The final screw requires the use of a 0.048/1.22 Hex screwdriver.
Torque is 15Ncm. There are 10 screws in the package.
It is compatible with the following top of Multiunit...
This is an Flat Seat Screw final screw that takes the DESS Angulated Screw Channel driver. Torque is 15Ncm.It can be used to move the screw access hole up to 25 degrees in any direction...
The final screw requires the use of a 0.048/1.20 Hex screwdriver.
Torque is 15Ncm. There are 10 screws in the package.
It is compatible with the following top of Multiunit...
This is a final screw with a DLC coating that takes a Nobel® Unigrip/Star driver. Torque is 15Ncm.A DLC coating is a diamond like coating that provides a low friction surface for...
Torque is 15Ncm. There are 10 screws in the package.
It is compatible with the following top of Multiunit Abutments without any Ti Bases: 3i Biomet Certain® Low Profile & 3i Osseotite® External Hex Astra EV® Multibase Blue Sky Bio® (BSB) BioHorizons® Internal Hex & BioHorizons® External Hex Hahn™ Hiossen® / Osstem Keystone® Genesis / Prima Megagen Anyridge® N Type Neodent GM® Nobel Active®, Nobel Replace®, & Nobel Brånemark® (NP and RP) Noris Medical® DESS® Multiunits
All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws.