This is a final screw that takes a .048/1.20mm hex driver. Torque is 20ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws...
This is a final screw for the ELLIPTIBase® ti bases that takes the DESS Angulated Screw Channel Driver. Recommended torque: 15ncm. It is compatible with Nobel® Active3.0. It can be used to...
This is a final screw that takes a Straumann® Torx driver. Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab...
This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver.
The torque is 15 ncm and is no longer being made with an anti-rotational flat side...
This ti base comes with a final screw, SKU 19.011 that takes a .048/1.20mm hex driver.
The torque is 20 ncm.
This ti base has a 3mm collar height and is no longer being made...
This ti base comes with a final screw, SKU 19.034 that takes a .048/1.20mm hex driver.
The torque is 20 ncm.
This ti base has a 3mm collar height.
Wax up sleeve sold separately...