This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.  This screw is compatible with MIS® Seven 3.0, MIS® C1 SP, and MIS® V3 NP. All of our screws are stress tested to 150% of the nominal torque...

This is a final screw that takes a 0.50/1.27mm hex driver. Torque is 25ncm.  The screw has M1.6 thread. It is compatible with the multiunit connection for MIS® V3, C1, and Seven. All of our screws are stress tested to 150% of the nominal...

This is a final screw that takes a .050/1.27mm hex driver.  Torque is 30ncm.   This screw is for MIS Seven, MIS C1 and MIS V3. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws...

This is an angulated screw channel final screw that takes the DESS Angulated Screw Channel driver. It is only compatible with the MIS® multiunit connection. It can be used to move the screw access hole up to 25 degrees in any direction. All...