10 units Pack Final Screw on UniAbutment/Final Long Screw on Multiunit (RP) - 19.018-P10 $92.75 This final screw that takes a 0.050/1.27mm Hex driver. Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. There are 10 screws in the package. This screw has a M1.4 screw... Add to Cart
Final Screw on UniAbutment/Final Long Screw on Multiunit (RP) - 19.018 $13.50 This final screw that takes a 0.050/1.27mm Hex driver. Torque is 15Ncm.It is compatible with Astra® Osseospeed 20º and 45º UniAbutments. This screw has a M1.4 screw thread and can be used on any of these Multiunits without any... Add to Cart
Ti Base - Engaging - 4.5/5.0 (Lilac) - 16.025 $40.25 This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 0.9mm collar height. Wax up sleeve sold separately - SKU 33.001P5 Add to Cart
Analog - 3.5/4.0 (Aqua) - 14.024 $13.50 This analog is for both stone model and digital model use. It is also available in a pack of 10 - SKU 14.024P10 Anodized with the color aqua. Add to Cart
Ti Base - Engaging - 3.5/4.0 (Aqua) - 16.024 $40.25 This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.1mm collar height. Wax up sleeve sold separately - SKU 33.001P5 Add to Cart
Analog - 4.5/5.0 (Lilac) - 14.025 $13.50 This analog is for both stone model and digital model use. It is also available in a pack of 10 - SKU 14.025P10 Anodized with the color lilac. Add to Cart
Intraoral Scan Body Carrier - DTPEIPEEK-P2 $37.25 This PEEK intra-oral scan body carrier enables you to tighten and loosen the intraoral scan body in hard to reach areas.These are autoclavable and reusable. Add to Cart
Screw for ANGLEBase® -3.5/4.0 (Aqua) - 19.441 $13.50 This is a final screw for the AngleBase® ti bases that takes the DESS Angulated Screw Channel driver. Torque is 35ncm. It is compatible with Nobel® Active - 3.5 (NP), Astra® Osseospeed - 3.5/4.0 (Aqua), Astra®... Add to Cart
Ti Base - Non Engaging - 20° UniAbutment - 15.036 $40.25 This ti base comes with a final screw, SKU 19.018 that takes a .050/1.27mm hex driver. The torque is 15 ncm. This ti base has a 0.45mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold... Add to Cart
Premilled Titanium Blank - 3.5/4.0 (Aqua) - 61.024 $39.25 This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.016 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet... Add to Cart
Premilled Titanium Blank - 4.5/5.0 (Lilac) - 61.025 $39.25 This premilled titanium blank is engaging, is 10mm in diameter, and has a total mill-able length of 20mm. It comes with the final screw - SKU 19.017 Holders for premills: Holder HLDSTD - 98mm disc holder - Standard 98mm Disc Machines that are wet... Add to Cart
Ti Base - Non Engaging - 3.5/4.0 (Aqua) - 15.024 $40.25 This ti base comes with a final screw, SKU 19.016 that takes a .050/1.27mm hex driver. The torque is 20 ncm. This ti base has a 1.1mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold... Add to Cart
Latch Style Driver - 24mm Length - DTC24H127 $40.25 This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. Add to Cart
Ti Base - Non Engaging - 4.5/5.0 (Lilac) - 15.025 $40.25 This ti base comes with a final screw, SKU 19.017 that takes a .050/1.27mm hex driver. The torque is 25 ncm. This ti base has a 0.9mm collar height and is no longer being made with an anti-rotational flat side. Wax up sleeve sold... Add to Cart
Temporary Abutment - Non Engaging - 3.5/4.0 (Aqua) - 24.024 $32.00 This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.016 Add to Cart
Impression Transfer - 3.5/4.0 (Aqua) - 17.024 $41.25 Impression transfers come prepackaged with both an open and closed tray screw. The closed tray screw has a minimal external height in order to be used in small mouth openings. The screws can be hand tightened or tightened with a .050/1.27mm Hex... Add to Cart
Temporary Abutment - 20° UniAbutment - 24.028 $32.00 This titanium temporary abutment comes with a screw that takes a .050/1.27mm hex driver - SKU 19.018 Add to Cart
ANGLEBase® - Non Engaging - 3.5/4.0 (Aqua) - 36.024 $40.25 The AngleBase® ti base comes with an angulated screw, SKU 19.441 that takes the DESS angulated screw channel driver. The torque is 20 ncm. This ti base is used for changing the screw access hole up to 25 degrees in any direction. This... Add to Cart
Latch Style Driver - 20mm Length - DTC20H127 $40.25 This latch style driver is made of stainless steel and is compatible with internal .050/1.27mm hex screws. This driver is heat treated for increased durability and wear resistance. Includes laser marked identification. Add to Cart
Intraoral Scan Body - 3.5/4.0 (Aqua) - 52.024 $50.50 This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.The Manual Tool for Intraoral Scan... Add to Cart