On Top of SRA Components

This analog is for both stone model and digital model use. This analog is for the Straumann Screw Retained Abutments (SRA) only.

This analog is for digital models and comes with screw. 

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. These abutments are used on top of the Straumann Screw Retained Abutment (SRA) only. They include a 10mm wax up sleeve and a final screw - SKU 19.098

Chrome Cobalt Interfaces are designed for casting or laser welding screw retained restorations. They include a 10mm wax up sleeve and a final screw - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only...

This is a final screw that takes a Straumann® Torx driver.  Torque is 15ncm. All of our screws are stress tested to 150% of the nominal torque value and can also be used as lab screws. It is also available in a pack of 10 - SKU 19.098

This is a 10 pack of final screws that takes a Straumann® Torx driver.  Torque is 15ncm. These screws are used on top of the Straumann Screw Retained Abutment (SRA) only. All of our screws are stress tested to 150% of the nominal torque...

This scan body is made of titanium that includes ZrN coating to reduce glitter effects and is designed for both intraoral and desktop scanning. It has a fixed internal screw for hand tightened.This scan body comes with the Manual Tool for...

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This titanium temporary abutment comes with a screw that takes a Straumann® Torx driver - SKU 19.098 This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only.

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. This abutment is used on top of the Straumann Screw Retained Abutment (SRA) only. The torque is 15 ncm. Wax up sleeve sold separately - SKU...

This ti base comes with a final screw, SKU 19.098 that takes a Straumann® Torx driver. The torque is 15 ncm and is no longer being made with an anti-rotational flat side. This abutment is used on top of the Straumann Screw...

This five pack of castable sleeves will fit on the DESS Non Engaging 15.098 Ti Bases for Straumann® SRA only.

This five pack of castable sleeves will fit on the DESS Engaging 16.098 Ti Bases for Straumann® SRA only.